How Gadgets Fix liquid damage

gadgets-fix-laptops-Phones-and-tablets-2
  • Firstly liquid damage is not easy to repair; even minor spills can present advanced issues requiring lots of tools and expertise. Repairing liquid damage is doable—however, if you are a novice, read this entire post to ensure you don’t get in over your head. Beware of any advice telling you to simply allow it to dry or clean it with alcohol; modern MacBooks have many components that can be damaged by a spill. This guide will explain all you need to know about liquid damage and help you decide whether to attempt your own DIY repair or find an expert. The parts are so delicate and tiny its easy to make mistakes and damage components.
  • Secondly, It’s safe to assume that if you are here, choose experienced with Liquid damage. If you are like most folks, you packed up your soggy device, made your way to your local Apple Store, and waited in line—only to be told that they won’t touch any device that has been exposed to liquid. They may offer you a “Tier 4 Repair”, to the tune of up to £2000. These options don’t sit well with most consumers, so you probably returned home and began to search the web for a better solution. Now that you’re here, let’s get started with your Gadgets Fix.

The type of liquid makes a difference!

  • Thirdly, While this may seem like a no-brainer, there is more to this than one may think. Water, tea and coffee are not particularly acidic and tend to be the easiest and quickest to repair and restore. Other liquids like wine can pose a new set of challenges due to the acidity.

What happens inside my device when the spill occurs.

  • fourthly, Once your laptop or phone’s water damage has occurred, the liquid will likely make its way to the logic board and other components. The liquid’s minerals and salts immediately begin to eat away at the metal, silicone and fiberglass components. Often, your device will work for a few days after the spill and then stop working. This is due to the metals oxidizing and slowly corroding. If there is a power source available, such as a battery, which is supplying power to the system (even if the device is off), the electric current will interact with the liquid and accelerate this corrosion process. This causes the copper and other metals to migrate across the board. If this corrosion process is not stopped, you will likely end up with a very expensive paperweight.

Liquid spilled in your device and Corrosion: The Science behind your DELAYED nightmare.

  • Fifty, Corrosion is a process, which converts refined metals to their more stable oxide. It is the slow and gradual deterioration of materials (usually metals) by chemical reaction within their environment, In this case the corrosion occurs when you combine electricity, metal, water and oxygen, creating iron oxide (or what is more commonly known as rust). There is no reliable timetable for this process to occur; a MacBook or phone internal components typically begin corroding  immediately after the spill, but in some cases your device can function normally for days or weeks without showing any obvious sign of a problem.  How fast the corrosion process takes depends on a ton of factors we have no control over, like humidity, the severity of the spill, and how long the device remained in contact with the liquid. The best practice is to not power on or use the MacBook or phone at all until you can address the damage. Below are a few examples of corrosion caused by a water spill.
  • You need to find someone to disconnect your battery
Block Image
Block Image

Now that we understand what happens inside your MacBook or phone when a spill occurs, Gadgets fix can begin to analyze what will be needed to correctly repair any issues you may come across

Gadgets fix Thorough Diagnostic

Any MacBook and phone that is exposed to liquid requires a thorough inspection. Even a small amount of corrosion, if left untreated, can cause a system failure further down the road.

  • You will need to get someone like gadgets fix to completely disassemble your MacBook and phone to ensure a thorough diagnostic.
  • Inspect the keyboard and trackpad for ANY corrosion or sticky residue—if found, a keyboard or trackpad replacement is recommended.
  • Inspect the logic board for any sign of liquid exposure—This should be done with a high-powered stereo microscope, and each SMD component should be checked for any signs of damage. If damage is found, the logic board should be cleaned ultrasonically, and damaged SMD components should then be replaced.
  • All display connections and wiring should be throughly inspected, and if there is any sign of liquid exposure a display replacement is recommended.
  • Test the battery – Batteries are often victims of liquid spills and can be very challenging to replace. Here is an example of what you can expect.
  • Data Integrity – Data integrity should be checked and re-checked. In the vast majority of cases, data is not effected. If corrosion is present on the SSD or HD, replacement is recommended.

Now that you have completed the diagnosis of what was damaged by the spill, it’s important to think before you act.

There are many resources to assist in DIY repair of MacBook and phone water damage—just take your time and ensure you have a good grasp of the task ahead of you, and you too can restore your MacBook after a liquid spill.

try to find a company like Gadgets fix which have 20 yeas experience

Good Luck! regards Gadgets!